Voyez-vous des traductions manquantes ou incorrectes ? Aidez-nous à traduire! Consultez notre guide de traduction: Guide de traduction


You'll need to be on at least Redwood v0.25 to make it through this tutorial.

We highly recommend going through the first tutorial or at least have built a slightly complex Redwood app on your own. You've hopefully got experience with:

  • Authorization
  • Cells
  • GraphQL & SDLs
  • Services

If you've been through the first part of the tutorial, you can pick up where you left off and continue here with part 2. Or, you can start from an example repo that picks up at the end of part 1, but already has additional styling and a starting test suite.

Using Your Own Repo#

If you want to use the same CSS classes we use in the following examples you'll need to add Tailwind to your repo:

yarn rw setup tailwind

However, none of the screenshots below will come anywhere close to what you're seeing (except for those isolated components you build in Storybook) so you may want to just start with the example repo below.

You'll also be missing out on a good starting test suite that we've added to the example repo.

If you deployed Part 1 to a service like Netlify, you would have changed database provider in schema.prisma to postgres or mysql. If that's the case then make sure your local development environment has changed over as well. Check out the Local Postgres Setup for assistance.

Once you're ready, start up the dev server:

yarn rw dev

Using the Example Repo#

If you haven't been through the first tutorial, or maybe you went through it on an older version of Redwood (anything pre-0.25) you can clone this repo which contains everything built in part 1 and also adds a little styling so it isn't quite so...tough to look at. Don't get us wrong, what we built in Part I had a great personality! We just gave it some hipper clothes and a nice haircut. We used TailwindCSS to style things up and added a <div> or two to give us some additional hooks to hang styling on.

git clone https://github.com/redwoodjs/redwood-tutorial
cd redwood-tutorial
yarn install
yarn rw prisma migrate dev
yarn rw dev

That'll check out the repo, install all the dependencies, create your local database and fill it with a few blog posts, and finally start up the dev server.


Your browser should open to a fresh new blog app:


Let's run the test suite to make sure everything is working as expected (you can stop the dev server or run the command in a second terminal window):

yarn rw test

The test command starts a persistent process which watches for file changes and automatically runs any tests associated with the changed file(s) (changing a component or its tests will trigger a test run).

Since we just started the suite, and we haven't changed any files yet, it may not actually run any tests at all. Hit a to tell it run all tests and we should get a passing suite:


If you started with your own repo from Part 1 you may see some failures here. Another reason to start with the example repo.

More on testing later, but for now just know that this is always what we want to aim for—all green in that left column. In fact best practices tell us you should not even commit any code unless the test suite passes locally. Not everyone adheres to this quite as strictly as others...<cough, cough>